Huawei MA5800 X7

Huawei MA5800 X7 | OLT | 2x MPLB, 2x PILA 10G Uplink, New

SKU: 136



Item Huawei MA5800-X7
Switching capacity of the system H90xMPLA: 3.6 Tbit/s 

H90xMPLB: 7 Tbit/s

*x refers to the end number of the version number of the hardware, such as 1, 2, 3, 5, etc

Maximum bandwidth per slot MPLB: 200 Gbit/s
MPLA: 100 Gbit/s
Maximum number of MAC addresses 262144
Maximum number of ARP/routing entries 131072
Maximum number of concurrent 4K video users 8000
GPON ports 112
XG-PON ports 112
XGS-PON ports 56
GE/FE ports 336
10GE ports 56
Cabinet supported N63E-22
Control Board Supported
H901MPLB It provides 4 GE/10GE upstream transmission ports and supports load sharing. By default, MA5800 connects to the upstream network through the control board
H901CKUA Supports stratum-3 clock functions by working with MPLB and MPLA
Upstream interface board Supported
H901NXED Enhanced 8-port 10GE upstream interface board, supporting 10GE/GE Ethernet upstream transmission. NXED is used when upstream ports currently provided in MA5800 are not enough.
Universal interface board Supported
H901CIUA Provides synchronous time/clock signal input&output interfaces, alarm parameter/Boolean value input&output interface. RS485 serial ports, and provides transparent transmission Ethernet ports.
Service Board Supported
H901GPHF Provides 16 GPON ports for access services
H901GPSF Provides 16 GPON ports for home access services
H901XGHD Provides 8 asymmetric 10G GPON ports for access services.
H901TWED Provides 8 symmetric 10G GPON ports for access services.
H901EDSH 32-channel E1 upstream board, supporting native TDM mode.
H901OGHK 48-port aggregated GE/FE optical interface board, supporting up to 48 channels of GE/FE
H901OXHD 8-port aggregated 10GE optical interface board, supporting GE/10GE Ethernet aggregation.
Power board Supported
H901PILA Provides -48V DC input
Fan Monitoring Board Supported
H901FMLA Supplier power to fans; controls and monitors the fans
H901FMMA Supplier power to fans; controls and monitors the fans
(W x D x H) (mm)
6 U high and 19 inches wide
Excluding mounting brackets: 442×268.7×263.9
Including IEC mounting brackets: 482.6×268.7×263.9
Including ETSI mounting brackets:535×268.7×263.9
Maximum weight(including mounting brackets) 26 kg
Maximum input current 40 A
Power supply Power supply mode: DC
Working voltage range: -38.4 V to -72 V
Rated voltage: -48 V / -60 V
Ambient temperature -40°C to +65°C The MA5800 can start up at a lowest
The MA5800 can start up at the lowest temperature of -25°C and run at -40°C.
Note: The 65°C temperature refers to the highest temperature measured at the air intake vent of the service subrack.
Ambient humidity 5% RH to 95% RH