Huawei GPUF/GPSF/GPLF is a 16-port GPON OLT interface card with B+/C+/C++ modules, designed for use with the Huawei MA5800 series devices, New

Available on backorder


Huawei H901GPUF is a 16-GPON port interface card with B+/C+/C++ SFP modules. It works together with ONU devices to enable GPON service access. It is applied to Huawei MA5800-X2, X7, X15, X17 NG OLT systems.

Throughput Capacity: 40 Gbit/s

Maximum Split Ratio: Class B+: 1:64; Class C+/++: 1:128

Optical Power of SFP Modules:

  • B+ SFP Module: 1.5 dBm to 5 dBm, Receiver Sensitivity: -28 dBm
  • C+ SFP Module: 3 dBm to 7 dBm, Receiver Sensitivity: -32 dBm
  • C++ SFP Module: 6 dBm to 10 dBm, Receiver sensitivity: -35 dBm

T-CONTs per PON port: 1024 Maximum MAC addresses: 32768 Number of service flows per PON card: 16368

Operating Wavelength: Tx: 1490 nm, Rx: 1310 nm Standards Compliance: ITU-T G.984.1, ITU-T G.984.2, ITU-T G.984.3, ITU-T G.984.

Item H901GPUF
Number of service ports 16-GPON port
Throughput Capacity 40 Gbit/s
Maximum distance difference between two ONT devices under the same PON port 40 km
T-CONTs per PON card 16368
Maximum frame size 2052 bytes
FEC (Forward Error Correction) Bidirectional
CAR (Committed Access Rate) Supported
HQoS (Hierarchical Quality of Service) Not supported
Variable-length OMCI (Optical Network Unit Management and Control Interface) Supported
ONU-based shaping or queue-based shaping Supported
Type B protection (dual-homing) Not supported
Type B protection (single-homing) Supported
Type C protection (dual-homing) Not supported
Type C protection (single-homing) Supported
IEEE 1588v2 (Precision Time Protocol) Supported
Detection and isolation of fake ONT devices Supported
Automatic shutdown at high temperature Supported
Energy efficiency for service cards Supported
D-CCAP (Distributed Converged Cable Access Platform) Not supported

GPON SFP Module Specifications:

Type B+ module: Single-directional optical module, Class B+
C+ module: Single-directional optical module, Class C+
C++ module: Single-directional optical module, Class C++
Operating Wavelength Tx: 1490 nm, Rx: 1310 nm
Encapsulation Type SFP
Port Speed Class B+/C+: Tx: 2.49 Gbit/s, Rx: 1.24 Gbit/s
Class C++: Tx: 2.488 Gbit/s, Rx: 1.244 Gbit/s
Min. Output Optical Power B+ module: 1.50 dBm
C+ module: 3.00 dBm
C++ module: 6.00 dBm
Max. Output Optical Power B+ module: 5.00 dBm
C+ module: 7.00 dBm
C++ module: 10.00 dBm
Max. Reception Sensitivity B+ module: -28.00 dBm
C+ module: -32.00 dBm
C++ module: -35.00 dBm
Optical Connector Type SC
Optical Fiber Type Single-mode
Optical Power Overload B+ module: -8.0 dBm
C+ module: -12.0 dBm
C++ module: -15.0 dBm

Device Specifications:

  • Dimensions (W x D x H): 23.30 mm x 257.90 mm x 399.20 mm
  • Power Consumption: Static: 25 W; Maximum: 50 W
  • Operating Temperature: -40°C to +65°C