SmartAX MA5600T is the world’s first OLT that integrates aggregation switch and edge router functionality.
It provides high-capacity GPON, 10GPON, and Ethernet P2P optical access, triple play services, TDM/ATM/Ethernet leased line services for enterprise users, high-precision clock, and high-capacity GE/10GE interfaces for cascading remote access devices.
MA5600T helps simplify network architecture, improves network reliability, and significantly reduces total cost of ownership (TCO).
MA5680T/MA5683T/MA5608T are a series of integrated access devices for optical and copper access. They support ADSL2+, VDSL2, Vectoring, SuperVector, SHDSL, POTS, GPON, 10G GPON, and P2P access modes, providing internet access, voice, and video services to subscribers. As a series of devices with large/medium/small capacities, they share the same software platform and service boards.
Large-capacity device: MA5680T with 16 service board slots (ETSI standard)/14 service board slots (IEC standard)
Medium-capacity device: MA5683T with 6 service board slots
Small-capacity device: MA5608T with 2 service board slots
MA5683T is an integrated optical and copper access device and can serve as DSLAM, OLT, or MDU.
The Huawei MA5683T chassis is 5U high with 6 service board slots, 2x SCUN main control board, 2x PRTE DC power supply board, supporting EPON, GPON, 10G PON, and P2P services.
If MA5683T serves as an OLT, it supports GPON, 10G GPON, and P2P access modes. It can be installed in residential areas or along the street, reducing the use of optical cables for ODN backbone, reducing costs and weight of ODN implementation, and minimizing equipment space in the CO room.
If MA5683T serves as a DSLAM, it supports ADSL2+, VDSL2, Vectoring, SuperVector, SHDSL, and POTS access modes.
If MA5683T serves as an MDU, it supports ADSL2+, VDSL2, Vectoring, SuperVector, SHDSL, and POTS access modes, and forwards packets upstream to the OLT via PON/GE/10 GE ports.
MA5683T is powered by PRTE DC power supply, and it is recommended to use AC/DC converter power supply ETP48100-B1-A1, ETP4860-B1A12 to change the power supply solution.
| Table Type | Name and Version | Description |
|---|---|---|
| Main Control Tables | SCUN | Main control board with most common applications, equipped with 4 GE uplink ports |
| SCUH | Supports 4 GE/10GE uplink ports | |
| SCUK | Supports 4 GE optical uplink ports | |
| Power Supply Tables | H801PRTA | Huawei SmartAX MA5600 power transfer board |
| H801PRTE | ||
| H801PRTG | ||
| Conditional Lifting Tables | X2CS | Table with 2-10GE optical interfaces |
| GICF | Table with 2-GE optical interfaces | |
| GICG | Table with 2-port GE electric interfaces | |
| GPON Table | GPBD/GPBH | Table with 8 GPON ports for interface |
| GPFD | Table with 16 GPON ports for interface | |
| XG-PON Table | XGBD | Table with 8 XGPON ports for interface |
| EPON Table | EPBD | Table with 8 EPON ports for interface |
| EPFD | Table with 16 EPON ports for interface | |
| 10G EPON Table | XEBD | Table with 8 XEPON ports for interface |
| Parameter | Value |
|---|---|
| Product Name | MA5683T |
| Switching Capacity of the Backplane Bus | 1.5 Tbit/s |
| L2 Packet Forwarding Rate in Power Mode of SCUB | 72 Mpps |
| L2 Packet Forwarding Rate in Power Mode of SCUN | 726 Mpps (Active/Standby mode), 1452 Mpps (Load-sharing mode) |
| L2 Packet Forwarding Rate in Power Mode of SCUK | 726 Mpps (Active/Standby mode), 1452 Mpps (Load-sharing mode) |
| L2 Packet Forwarding Rate in Power Mode of SCUF | 190 Mpps |
| L2 Packet Forwarding Rate in Power Mode of SCUH | 1428 Mpps (Active/Standby mode), 2856 Mpps (Load-sharing mode) |
| Control Board Switching Capacity | SCUB: 48 Gbit/s |
| SCUN: 480 Gbit/s (Active/Standby mode), 960 Gbit/s (Load-sharing mode) | |
| SCUK: 480 Gbit/s (Active/Standby mode), 960 Gbit/s (Load-sharing mode) | |
| SCUF: 128 Gbit/s | |
| SCUH: 960 Gbit/s (Active/Standby mode), 1920 Gbit/s (Load-sharing mode) | |
| Switch/Forwarding Latency | Short switching latency: 100 Mbit/s Ethernet port sends a 64-byte Ethernet packet with a latency shorter than 20 μs. |
| BER at Full Load | Port BER during data transmission at full load < 10 e-7 |
| System Performance | Redundant configuration |
| System Availability in Typical Configuration | >99.999% |
| Average Time Between Failures (years) | ≈45 |
| Configuration | |
| Management Port | Number of 10 Mbit/s/100 Mbit/s Ethernet management ports: 1 |
| Local/Remote Maintenance Serial Ports | 1 |
| Monitoring Port | Number of environmental monitoring serial ports: 1 |
| Max GPON Ports in Aggregate | 96 |
| Max 10G GPON Ports in Aggregate | 24 |
| Max P2P FE Ports in Aggregate | 288 |
| Max P2P GE Ports in Aggregate | 288 |
| Max Uplink Ports (GE Ports in GIU Slot) in Aggregate | 8 |
| Max Uplink Ports (10GE Ports in GIU Slot) in Aggregate | 4 |
| Management Ports | |
| Out-of-Band Management Port (RJ-45) | SCUB/SCUN/SCUF/SCUH control board: 1 port |
| Local Serial Port (Console) | SCUB/SCUN/SCUF/SCUH control board: 1 port |
| Uplink Ports | |
| GE Electrical Ports | GICE: 4-port board |
| GE Optical Ports | GICF/GICK: 2-port board |
| SCUB/SCUN/SCUH/GICD/GSCA: 4-port board | |
| ETHB/SPUA/SPUF: 8-port board | |
| SPUC: 40-port board | |
| 10GE Optical Ports | X2CS/SPUA: 2-port board |
| SPUC: 4-port board | |
| SPF: 8-port board | |
| E1 Ports | TOPA: 16-port board |
| STM-1 Uplink Optical Ports | TOPA: 2-port board |
| PON Uplink Optical Ports | P2CA: 2-port board (One PON port is available, the other is reserved) |
| Service Ports | |
| GPON Ports | GPBD/GPBH: 8-port board |
| GPFD: 16-port board | |
| 10G GPON Ports | XGBC: 4-port board |
| XGBD: 8-port board | |
| P2P GE Optical Ports | OPGD/OPGE: Single-phase bidirectional: 48-port board, Two-phase bidirectional: 24-port board |
| P2P FE Optical Ports | OPFA: 16-port board |
| OPGD/OPGE: Single-phase bidirectional: 48-port board, Two-phase bidirectional: 24-port board | |
| Ethernet Optical Ports | ETHB: 8-port board |
| E1 Ports | H802EDTB: 16-port board |
| Device Specifications | |
| Dimensions (W x D x H, without mounting bracket) | 442.00 mm x 283.20 mm x 263.90 mm |
| Dimensions (W x D x H, including mounting brackets) | 535.00 mm x 283.20 mm x 263.90 mm (for ETSI rack) |
| 482.60 mm x 283.20 mm x 263.90 mm (for IEC rack) | |
| Weight (empty chassis) | 7.0 kg |
| Operating Environment | For indoor cabinet |
| Configured with 1 subrack: -25°C to +65°C | |
| Configured with 2 subracks: -25°C to +55°C | |
| Relative Humidity Environment | 5% RH to 95% RH |
| Atmospheric Pressure | 61 kPa to 106 kPa |
| Altitude | < 4000 m |