Huawei H901GPUF is a 16-GPON port interface card with B+/C+/C++ SFP modules. It works together with ONU devices to enable GPON service access. It is applied to Huawei MA5800-X2, X7, X15, X17 NG OLT systems.
Throughput Capacity: 40 Gbit/s
Maximum Split Ratio: Class B+: 1:64; Class C+/++: 1:128
Optical Power of SFP Modules:
- B+ SFP Module: 1.5 dBm to 5 dBm, Receiver Sensitivity: -28 dBm
- C+ SFP Module: 3 dBm to 7 dBm, Receiver Sensitivity: -32 dBm
- C++ SFP Module: 6 dBm to 10 dBm, Receiver sensitivity: -35 dBm
T-CONTs per PON port: 1024 Maximum MAC addresses: 32768 Number of service flows per PON card: 16368
Operating Wavelength: Tx: 1490 nm, Rx: 1310 nm Standards Compliance: ITU-T G.984.1, ITU-T G.984.2, ITU-T G.984.3, ITU-T G.984.
| Item | H901GPUF |
|---|---|
| Number of service ports | 16-GPON port |
| Throughput Capacity | 40 Gbit/s |
| Maximum distance difference between two ONT devices under the same PON port | 40 km |
| T-CONTs per PON card | 16368 |
| Maximum frame size | 2052 bytes |
| FEC (Forward Error Correction) | Bidirectional |
| CAR (Committed Access Rate) | Supported |
| HQoS (Hierarchical Quality of Service) | Not supported |
| Variable-length OMCI (Optical Network Unit Management and Control Interface) | Supported |
| ONU-based shaping or queue-based shaping | Supported |
| Type B protection (dual-homing) | Not supported |
| Type B protection (single-homing) | Supported |
| Type C protection (dual-homing) | Not supported |
| Type C protection (single-homing) | Supported |
| IEEE 1588v2 (Precision Time Protocol) | Supported |
| Detection and isolation of fake ONT devices | Supported |
| Automatic shutdown at high temperature | Supported |
| Energy efficiency for service cards | Supported |
| D-CCAP (Distributed Converged Cable Access Platform) | Not supported |
GPON SFP Module Specifications:
| Specification | |
|---|---|
| Type | B+ module: Single-directional optical module, Class B+ |
| C+ module: Single-directional optical module, Class C+ | |
| C++ module: Single-directional optical module, Class C++ | |
| Operating Wavelength | Tx: 1490 nm, Rx: 1310 nm |
| Encapsulation Type | SFP |
| Port Speed | Class B+/C+: Tx: 2.49 Gbit/s, Rx: 1.24 Gbit/s |
| Class C++: Tx: 2.488 Gbit/s, Rx: 1.244 Gbit/s | |
| Min. Output Optical Power | B+ module: 1.50 dBm |
| C+ module: 3.00 dBm | |
| C++ module: 6.00 dBm | |
| Max. Output Optical Power | B+ module: 5.00 dBm |
| C+ module: 7.00 dBm | |
| C++ module: 10.00 dBm | |
| Max. Reception Sensitivity | B+ module: -28.00 dBm |
| C+ module: -32.00 dBm | |
| C++ module: -35.00 dBm | |
| Optical Connector Type | SC |
| Optical Fiber Type | Single-mode |
| Optical Power Overload | B+ module: -8.0 dBm |
| C+ module: -12.0 dBm | |
| C++ module: -15.0 dBm |
Device Specifications:
- Dimensions (W x D x H): 23.30 mm x 257.90 mm x 399.20 mm
- Power Consumption: Static: 25 W; Maximum: 50 W
- Operating Temperature: -40°C to +65°C