Chassis: ZTE ZXA10 C600 19-inch Chassis with 2 Main Control Boards and 2 PRVR DC Power Supply Boards.
– Main Control Boards Options:
– SFUL: Enhanced SFUL
– SFULV: Enhanced SFULV
– SFUH (with 410GE Optical Uplinks)
– SFUHV (with 410GE Optical Uplinks)
– Uplink Boards:
– XFNH (16-port GE/10GE Uplink)
– XFTO (8-port 10GE Uplink)
– Supported PON Boards for ZTE OLT:
| GPON | XG-PON | XGS-PON | XG-PON and GPON Combo | XGS-PON and GPON Combo | Ports |
|---|---|---|---|---|---|
| ZTE C300/C320/C350 | GTGO | GTXO | GTTO | GTBO | 8 |
| GTGH | 16 | ||||
| C600/C650/C680 | GFGH | GFXH | GFTH | GFBN/GFBH | GFCH |
ZTE ZXA10 C600 OLT is a high-capacity optical access device oriented towards network reconstruction based on the TITAN platform. It meets the needs for access to various scenarios of ultra-high bandwidth, rich video content, FMC, network reconstruction, as well as provider-level QoS and security.
• Features:
– 19-inch platform with 11U height and 17 service slots supporting multiple access technologies.
– Supports GPON, XG-PON, XGS-PON, Combo PON, 10G-EPON, and GE P2P access technologies.
– Seamless transition to 50G PON.
– Provides L2 switching, VLAN services, L3 routing protocols, and service processing capabilities.
– Supports flexible configurations and adapts to different application scenarios.
• Advanced Architecture Meets Future Requirements:
– High-quality path and fully distributed programmable architecture.
– Separate control and encapsulation planes with redundant protection.
– Supports ISSU and NSR to allow zero interruption during switching or upgrades.
– Supports TDM-like channels to ensure ultra-low latency and meet 5G uRLLC requirements.
• Higher Bandwidth to Meet Multi-Service Access:
– Industry-leading bandwidth and switch capacity.
– Fully compatible with multiple generations of PON and various technological directions.
– SDN-ready, oriented towards AO/CO reconstruction.
– Supports Netconf/YANG and smooth migration to SDN.
– Supports network slicing.
– Supports built-in NFVI blade-like for experience-sensitive services.
• Supports Combo PON, the First 3-in-1 Combination in the Industry:
– WDM1r is integrated into the optical module without affecting existing GPON services.
– Supports flexible deployment of GPON and 10G-GPON ONUs according to service development.
• Package Details:
– Main Control Board: SFUL: 2
– Uplink: XFTO: 2
• 10GE Optical Interface Card with 8 ports of 10GE Uplink each.
• Switch Fabric Capacity on Rear Panel: ZXA10 C600: 14 Tbit/s
• Switching Capacity of Switch Card: ZXA10 C600: 3.6 Tbit/s (one SFUL/SFULV/SFUH/SFUHV switch card)
• Switching System Capacity: ZXA10 C600: 7.2 Tbit/s
• Switching and Forwarding Delay:
• Upstream: ≤1500 μs
• Downstream: ≤100 μs
• Bit Error Rate under Full Load: <10 e-9 (transmission at full load)
• GPON Ports: 0
• Remaining Service Slots: 15
• Power Supply Mode: DC power supply: -48V+/-20%, -60V+/-20%
• Dimensions (mm): 486.1 mm × 482.6 mm × 288.5 mm
• Weight (kg):
– Empty frame: 18 kg
– Full configuration: <52 kg