The ZXA10 C300, the world’s first platform for future-proof optical access with the highest capacity, was developed with mass optical access deployment and cost-effectiveness in mind. Its powerful features and high performance make the mass deployment of FTTx networks easier than ever before.
The ZTE ZXA10 C300 features a 19-inch chassis with a 2SCTM main control board with 410GE SFP+ uplink ports and 2*PRWG DC power supply boards.
The ZXA10 C300 supports two types of shelves:
- ETSI 21-inch shelf
- IEC 19-inch shelf
These two shelves differ in width and the number of slots. They share the same cards, except for backplanes and fan boxes.
Main control board options include: SCXN, SCTM, SCXM, or SCXL.
- SCTM: Supports a switching capacity of 2.56 Tbps, with a MAC address table of 256k.
- SCXN: Supports a switching capacity of 480 Gbps, with a MAC address table of 32k, and VoIP function (with VoIP daughter card).
- SCXM: Supports a switching capacity of 480 Gbps and a MAC address table of 32k.
- SCXL: Supports a switching capacity of 800 Gbps and a MAC address table of 32k.
Uplink boards include:
- XUTQ: 4-port 10GE optical uplink Ethernet interface card.
- XUVQ: 4-port 10GE optical uplink Ethernet interface card, supports SynE and IEEE 1588 TC function.
- HUTQ: 2-port 10GE and 2-port GE optical uplink Ethernet interface card.
- HUVQ: 2-port 10GE and 2-port GE optical uplink Ethernet interface card, supports SynE and IEEE 1588 TC function.
- GUFQ: 4-port optical Ethernet uplink card. Four optical interfaces can be GE optical interfaces (requires GFSQ daughter card), or FE optical interfaces (requires FFSQ daughter card).
- GUSQ: 2-port optical and 2-port electrical Ethernet uplink card. Two optical interfaces can be GE optical interfaces (with GFSD daughter card), or FE optical interfaces (with FFSD daughter card). Two electrical interfaces are adaptive electrical interfaces for 10 M/100 M/1000 M (with GTSD daughter card).
Power boards: PRWG or PRWH.
The ZXA10 C300/C350 power cards use -48 V DC power supply and provide power to each card. The system supports two power cards. When the input voltage of the two power units is equal, the two power cards work in load balancing mode. PRWG supports a maximum current of 30A, while PRWH supports a maximum current of 40A.
Supported PON Cards for ZTE OLT:
GPON, XG-PON, XGS-PON, XG-PON and GPON Combination, XGS-PON and GPON Combination, with various port configurations for different ZTE OLT models.
Specifications of GPON Optical Module:
Details the specifications of unidirectional bidirectional optical modules for GPON, including operating wavelengths, encapsulation types, bandwidth, optical power levels, receiver sensitivity, connector types, fiber types, transmission distances, optical power saturation, and extinction ratios.
Configuration details of ZXA10 C300 and ZXA10 C320, including management interface options.